K600 Series Lift’n Cart Multi 46″ Base
Item: Lift'n Cart KB-600-UNI8-26 (Base Only)
$549.99
Generator Cart Base For Installing Generac, Kohler, and other Stationary Generators
Compatible with:
- Generac 10-26kWatt Guardian series*
- Kohler 8-26kWatt residential series
- Briggs & Stratton 18-26KWatt PowerProtect series*
- Cummins 13-20kWatt Quiet Connect series*
- 3″ cement pads
Details:
- Stainless Steel
- Wide enough to straddle a full pallet
- 46″ wide base (60″ when full cart with handle)
*Note Briggs & Stratton and Cummins generators may need to be placed on temporary 1” supports to get the base on and off due to generator lifting holes being too low to the ground. Only works on Generac models made after 2022.
Handle sold separately. Click here for Base Assembly Instructions. Ships in one box. See features and specs below.
- Features & Specs
- Brochures
- Assembly Instructions
- How To Steps
- Parts
Description
FEATURES
- Designed for one person to perform an entire generator and pad placement
- Base includes stowable hanger kit for 3” pre-cast pads
- Cart and base are designed to fit in a full size 5.5’ or longer pickup bed
- Cart and base are designed to be hung on a wall to minimize shop space when not in use
- Anti-tip back auto safety latches for base with conveniently located releases levers on handles to prevent smaller generators from tipping over backwards when carting
- Large flotation tires for soft lawns, gravel and dirt, with enough traction to minimize side slip on hills
- Extra wide wheelbase to straddle pallets
- Sealed ball bearing wheel hubs for long life and heavy loads
- Ergonomic handle height for optimum pushing angle
- Durable tubular steel construction combines strength with light weight
| SPECS | ||
|---|---|---|
| HANDLE | BASE | |
| Model: | K600 | MULTI8-26 |
| Weight: | 71 lbs | 22 lbs |
| Dimensions: | L: 65.5" | L: 48" |
| W: 59.3" | W: 41" | |
| Capacity: | 600 lbs | 600 lbs |
| Tire Size: | 18" x 9" | |
| 22" x 9" (Optional) |
How To Steps
STEP 1
Bolt together base to form a rigid lifting frame, then use included pad hangers for lifting standard 3” precast cement generator pads.
STEP 2
Walk up behind base with wheeled handle, hook in front catch on base bolts then push down to auto lock in anti-tip back feature. Push down main handle bar to lift and move cement pad.
STEP 3
Insert base aluminum tubes through generator lifting holes then bolt together base to form a rigid lifting frame. Nuts only need to be hand tightened. Generator can now be lifted and moved. Note: Bases have multiple hole options for different generators including Generac, Kohler, and Cummins.
STEP 4
After placing generator on pad, disengage handle from base carefully then remove aluminum rods from generator.
Parts
